The basic concept of creating sunlight effect
First let’s take a look of a typical sunlight effect rendering. Here the sunlight, which comes through the windows, is the only light source to light up the room.
To create such a sunlight effect, there are basically two methods:
Method 1: Create a virtual light source, which is extremely far away from the room, to simulate sun.
Method 2: Set wall hole (normally the glass of door or window) as light source to simulate the effect of sun-ray goes through it
1. There would be no significant differences of final effect between two methods.
2. For interior scene, sun-ray that is not going through wall hole will be wasted.
3. For interior scene with multiple wall holes, it’s much easier to use method 1.
Basic process of creating sunlight effect
We will use the following sample room to show you the basic process of two methods.
Here’s the condition of this sample room:
z No interior light sources
z Use “Material Editor” to remove the reflection property of window glasses and change their transparency value to 0.9
z Use “Material Editor” to set all walls and ceiling as “Wall Material”.
z Use “Material Editor” to set floor as “Wood”, change its value of reflection and smoothness to 0.05, remove its color blending property.
A. Select “Sunlight Setting…” from “Light Setting” menu.
B. Tick “Activate Sunlight Effect” and “Activate Sky Effect” option in the popup dialog box, click “Exit” to finish.
C. Click on toolbar and change “Sky Method” to “Outdoor” in the popup dialog box.
D. Click “OK” to start Radiosity, and click to stop when you think it’s enough.
E. Click , and then click “OK” in the popup dialog box to start Raytrace.
A. Select “New Light” from “Light Setting” menu.
B. Hold Shift to select four window glasses by left-licking, and right-click to finish.
C. Click , Hold Shift to select four window glasses by left licking.
D. Change the “Type” to “Sunlight” in the popup dialog box.
E. Tick “Visible” in the dialog box, click “Close” to finish.
F. Repeat A and B of method 1 to activate sunlight effect and sky effect.
G. Click on toolbar and use default “Sky Method”, which is “Indoor”, in the popup dialog box.
H. Click “OK” to start Radiosity, and click to stop when you think it’s enough.
I. Click , and then click “OK” in the popup dialog box to start Raytrace.
Explain parameters of sunlight effect
The parameters of sunlight effect could be divided into 2 parts:
z Light source parameters
z Sunlight setting parameters
Light source parameters
If using method 2, you could set certain sunlight parameters by modifying the light source parameters.
Sunlight setting parameters
Select “Sunlight Setting…” from “Light Setting” menu. In the popup dialog box, you can modify all sunlight parameters.
Setting of sunlight direction in this dialog box is linked to the “Edit Light Source”
dialog box. If changing the direction here, the setting in “Edit Light Source” dialog box will also be changed.